Vinyl siding panels interlock as they are installed. The upper overlapping siding panel has a U-shaped lip that fits down around the locking channel of the previously installed piece of siding and is held in place as it is installed. The starter strip is the first strip of vinyl siding that is nailed to the wall.
Backerboard: a flat material used on the face of the house, applied between the studs and the siding or over existing wall surfaceto provide an even surface for installing vinyl siding. Buttlock: the bottom edge of a siding or soffit panel, or accessory piece, opposite the nailing slots, which locks onto the preceding panel. Channel: the area of the accessory trim or corner post where siding or soffit panels are inserted.
After the roofing is installed on your house we try to get to the exterior finishing as soon as possible to protect our house from the elements. According to the building codeno matter what exterior finish we put on our house, we need tar paper on top of the sheathing. Tar paper is rated for the number of minutes it keeps moisture from passing through it.
Are you looking to install vinyl siding on your own? Or you are looking for DIY ideas for a vinyl siding? Well, you can install vinyl siding on your own. However, do it yourself only when you have basic handyman skills like cutting, nailing and measuring.
While vinyl can be a great alternative to regular house paint, and it does a good job of dressing up problem walls, there is a tradeoff. Although it looks like conventional siding from a distance, the illusion falters at corners, windows, doors and wall-mounted utility equipment. Part of the design dilemma is that vinyl expands and contracts a good deal with changes in temperature.
Below are some siding terminology definitions to help you understand your next siding project. The material that is nailed to the studs on the exterior side of the wall, providing a surface area to fasten the siding and trim. The piece of siding located on the opposite side to the fastening strip, which locks into the preceding piece of siding or trim.
Author: Mitten Siding and Accessories in October When most people think about vinyl siding, they envision it installed on a home in a horizontal design. Board and batten siding creates an exterior look that provides bold vertical shadow lines that dramatically reproduces early-American architectural style.
InspectAPedia tolerates no conflicts of interest. We have no relationship with advertisers, products, or services discussed at this website. We give detailed specifications for installing vinyl siding including corner posts, fixture mounting blocks, use of J and F channel, nailing guidelines, horizontal overlap, trim details and options, and how to assure proper waterproofing at a vinyl-clad building. Steven Bliss.
Learn how to install vinyl siding on your home. From the proper nail technique to the basics of siding installation, we have you and your house covered with this DIY project. Allow for expansion and contraction.
There are two basic steps to installing vinyl siding: installing the trim pieces and installing the siding itself. Every place where vinyl siding joins something else—a window, a door, another wall—requires the appropriate trim piece. The trim pieces loosely hold the siding in place, cover any cuts, and provide a small space where the siding can expand and contract. All lines of vinyl siding come with several standard trim pieces, plus some extras.